High purity water deoxygenation
The high purity water deoxygenation device for removal of dissolved oxygen from water was developed and tested by FSUE «Alexandrov NITI».
The deoxygenation device can be used in power engineering, medicine, and microelectronics.
The main features of the device are as follows:
- Reagentless method (chemical reagents and high purity gases are not required)
- Compactness
- Portability
- Manual and automatic control
- Easy maintenance
- Low energy costs when compared with thermal deaeration
- Possibility of capacity increase without sufficient design alteration
Technical characteristic | |
Capacity | 500 dm3/h |
Warm-up time | at most 30 min |
Max dissolved-oxygen concentration in feed water | 10 mg/dm3 |
Max dissolved- oxygen concentration in finish water | 0.01 mg/dm3 |
Max specific electrical conductivity of feed water | 2 µS/cm |
Max specific electrical conductivity of finish water | 0.2 µS/cm |
Weight | 120 kg |
The deoxygenation device is successfully used at nuclear facilities.